| Frequently Asked
Questions |
| How do I size a dryer for
my Central Office? |
| Dielectric recommends that
the flow from the office be at least 30% of the
capacity of the dryer. |
| What type of warranty does
my Dielectric air dryer have? |
| Dryers with piston
compressors are warranteed for one year and
dryers with DC (water sealed) compressors have a
two year warranty. |
| Why does my dryer have a
water ejector and where do I run the
drain? |
Depending on the conditions
in your location a water sealed dryer can
produce as much as (5) five gallons of excess
water per week. This is water that is reclaimed
from the purge air when the towers regenerate. You can run the water
drain to a sink or other location that is up to
200 feet away and can have a vertical rise of up
to 15 feet. |
| Will extremely humid
conditions affect the operation of my air
dryer? |
|
The drying towers on all
Dielectric air dryers are sized to operate in
conditions up to 100% relative humidity.
|
How often does my
Dielectric dryer require maintenance?
|
| Dielectric water sealed
dryers require maintenance twice a year (water
and air filters) while the dryers with piston
type compressors require filter changes
quarterly. Proper maintenance will extend the
like of the air dryer.
|
My air dryer, operating on
an ATS-300, will not restart after an alarm?
|
Turn the power switch on
the front panel off and then on again. Then
check the toggle switch on the IUC to be sure
that it has been toggled to the reset
position.
|
Can I install a field
repairable dielectric compressor in my
"Other Manufacturers" air dryer.
|
Yes! Contact Dielectric to
determine the proper compressor and adaptor kit
required for the change.
|