Products

 
Water Sealed Dryers
from 5000 to 30,000 S.C.F.D.
Piston Compressor Dryers
from 2,400 to 7,200 S.C.F.D.
Special Purpose Dryers
200 - 850 S.C.F.D. and Portables
ATS Transfer Systems
ATS-300 Transfer and Monitoring System, ATS-200Plus
DC Series Compressors
DC-10, DC-12, DC-15, DC-20 DC-6Q, DC-10Q, DC-12Q, DC-15Q, DC-20Q
Panels, Racks, Manifolds
Pipe Feed Panels
"B" Meter Panels Transducer Panels Manifolds
Rack Assemblies
Tubing and Fittings
Multi-Bundle Tubing
Single Plastic Tubing
Nyla-braid Tubing
Tube Fittings
Industrial Dryers
DRY-PAK¨ Twin Tower Dryers
ED Series Dryers
Sales Reps
Contact information for the sales rep in your area.
Tech Support
Our top notch technical support team.
 
ATS Transfer Systems

Dielectric's piston compressor intermittent operating air dryers are the ideal unit for lower flow (less than 7200 S.C.F.D.) applications. These units utilize an oilless piston compressor in conjunction with a heatless drying system to pressurize a storage tank and the air is then regulated to the field.

These air dryers are equipped with hour meters to help track run hours and assist with maintenance scheduling. In addition, all these models are equipped with a humidity alarm, preset at 2%RH at 70¡F and a humidity bypass. Other alarm combinations vary from model to model, contact the factory for specific details of each models alarm configuration.

The Model 5000 and 7200 intermittent operating air dryers are the ideal unit for lower flow (less than 7200 S.C.F.D.) applications. These units have two indepenent oilless compressors that can be operated individually or in a "duplex" mode where the compressors alternate at each start-up. For added protection these units are equipped with an adjustable duplex timer that will start the standby compressor in the event that the on-line compressor doesn't pressurize the storage tank within the preset time limit. This system works in conjunction with a heatless drying system to pressurize a storage tank and the air is then regulated to the field.

Specifications

Model 5000CO 7200CO
Normal
Output
5000
SCFD
7200
SCFD
Maximum
Output
6000
SCFD
8400
SCFD
Electrical
Requirement
208/230V
60Hz-1Ph
208/230V
60Hz-1Ph
Operating
Current
11 Amp 13 Amp
Control Circuit
Breaker
2 Amp
2 pole
2 Amp
2 pole
Height 50 In. 50 In.
Width 29 In. 29 In.
Depth 22¸ In. 22¸ In.
Weight 300 lbs. 335 lbs.

The Model 2400 and 3200 intermittent operating air dryers are the ideal unit for small capacity applications that require air flows of up to 3200 S.C.F.D.. These models feature full alarm capability that can be monitored a single "fault" alarm or the five alarm functions can be monitored individually. The oilless compressor operates on a pressure switch to pressurize a storage tank and the air is then regulated to the field. The electrical control panel uses all solid state components for increased reliability and ease of service.

Specifications

Model 2400CO 3200CO
Normal
Output
2400
SCFD
3200
SCFD
Maximum
Output
3500
SCFD
4100
SCFD
Electrical
Requirement
115V
60Hz-1Ph
115V
60Hz-1Ph
Operating
Current
11 Amp 13 Amp
Control Circuit
Breaker
1 Amp
2 pole
1 Amp
2 pole
Height 47 In. 47 In.
Width 17¹ In. 17¹ In.
Depth 17¹ In. 17¹ In.
Weight 155 lbs. 175 lbs.

Piston Compressor
Air Dryer Model 5000/7200
Air Dryer Model 2400/3200
Air Dryer


Dielectric Communications
Bridgton Commerce Ctr., Rte 302
RR#2, Box 756
Bridgton, ME 04009
(207) 647-9495
(877) 247-3797
Fax: 207-647-9496
dryers@dielectric.spx.com


Pressurization | Products | Support | Answers | News | Sales Reps | About Dielectric | Contact Us | Broadcast

All pages and images © 1998 Dielectric Communications, A unit of SPX Corporation
home news answers support products contact us about Dielectric sales reps