The 20000SE and 30000SE central office dryers will provide years of trouble-free service under even the most demanding conditions.

Specifications

Model	20000SE	30000SE
Maximum Output	20000 SCFD	30000 SCFD
Electrical Requirement	208/230V 60Hz-1Ph	208/230V 60Hz-3Ph
Operating Current	21 Amp	23 Amp
Control Circuit Breaker	2 Amp 2 pole	2 Amp 2 pole
Alarm Circuit Fuses	1/2 Amp	1/2 Amp
Height	71² In.	71² In.
Width	28¹ In.	28¹ In.
Depth	24 In.	24 In.
Weight	450 lbs.	470 lbs.

Dielectric's RE series of redundant air dryers offer superior performance combined with the convenience of two (2) separate air drying systems in one cabinet. The utilization of this configuration not only saves valuable space but also allows the immediate start-up of the standby system should a fault trigger an alarm in the online system. With all the features of the standard ATS-200Plus controller the RE system allows you to choose to operate either system, both systems or to alternate between the two systems on a preprogrammed schedule.

Specifications

Model	10000RE	20000RE	30000RE
Normal Output	5000 SCFD	10000 SCFD	15000 SCFD
Maximum Output	10000 SCFD	20000 SCFD	30000 SCFD
Electrical Requirement	208/230V 60Hz-1Ph	208/230V 60Hz-1Ph	208/230V 60Hz-3Ph
Operating Current	9 Amp	12 Amp	11 Amp
Control Circuit Breaker	2 Amp 2 pole	2 Amp 2 pole	2 Amp 2 pole
Alarm Circuit Fuses	1/2 Amp	1/2 Amp	1/2 Amp
Height	71² In.	71² In.	71² In.
Width	28¹ In.	28¹ In.	28¹ In.
Depth	24 In.	24 In.	24 In.
Weight	440 lbs.	470 lbs.	490 lbs.

Moderate capacity units with output capacities up to 15000 S.C.F.D. the intermediate SE air dryers incorporate the same features as our large capacity air dryers. These dryers use a single DC series water sealed compressor combined with the heatless drying system to provide a continuous source of dry air.

Specifications

Model	5000SE	10000SE	15000SE
Maximum Output	5000 SCFD	10000 SCFD	15000 SCFD
Electrical Requirement	208/230V 60Hz-1Ph	208/230V 60Hz-1Ph	208/230V 60Hz-3Ph
Operating Current	6 Amp	12 Amp	11 Amp
Control Circuit Breaker	2 Amp 2 pole	2 Amp 2 pole	2 Amp 2 pole
Alarm Circuit Fuses	1/2 Amp	1/2 Amp	1/2 Amp
Height	52 In.	52 In.	52 In.
Width	28¹ In.	28¹ In.	28¹ In.
Depth	24 In.	24 In.	24 In.
Weight	250 lbs.	275 lbs.	295 lbs.

Dielectric's unique modular design allows equal capacity to standard configurations and uses 30% of the floor space. It incorporates all of the features of our standard design in an efficient unitized package. The roll-forward design allows side-by-side installation and side access for maintenance.

The modular concept provides the greatest redundancy, unit independence and reliability, particularly in areas where floor space requirements are a condsideration.

Specifications

Model	5000ME	10000ME	15000ME
Maximum Output	5000 SCFD	10000 SCFD	15000 SCFD
Electrical Requirement	208/230V 60Hz-1Ph	208/230V 60Hz-1Ph	208/230V 60Hz-3Ph
Operating Current	6 Amp	12 Amp	11 Amp
Control Circuit Breaker	2 Amp 2 pole	2 Amp 2 pole	2 Amp 2 pole
Alarm Circuit Fuses	1/2 Amp	1/2 Amp	1/2 Amp
Height	55.5 In.	55.5 In.	55.5 In.
Width	13.38 In.	13.38 In.	13.38 In.
Depth	30 In.	30 In.	30 In.
Weight	245 lbs.	265 lbs.	275 lbs.