With 959 repack antenna bookings and more than 930 shipped, Dielectric’s business and manufacturing foundation remains strong as the company prepares for what’s ahead
RAYMOND, Maine, May 11, 2020 — As the US spectrum repack advances toward conclusion, Dielectric is hard at work preparing for the next generation of over-the-air broadcast opportunities. With Dielectric preparing its remaining shipments for Phase 10 – the final repack phase for higher power stations – the company reports an approximate 82 percent of the total repack market share, and a strong foundation to address emerging business opportunities.
“We have booked 959 repack or displaced antenna arrays in North America since we began taking repack orders, and have shipped more than 930 of those arrays over a 30-month period,” said Jay Martin, Vice President of Sales, Dielectric. “Upon adding in non-repack projects, we estimate that Dielectric will ship 1065 medium-to-high power antennas within the same period in North America alone by the conclusion of repack.”
Much of this success has been due to Dielectric’s advance preparation for the busy repack period, which emphasized capacity throughout the organization. Dielectric established a manufacturing strategy across two facilities that focused on advance production, assembly and stocking of antennas and supporting RF systems. This ensured that Dielectric could not only reliably deliver orders across strict repack timelines, but also accommodate emergency requests and fill new orders unrelated to repack.
“Beyond antennas, we built 111 miles of transmission line, 1039 RF filters, and 101 multichannel combiners for TV alone,” said Martin. “We built 395 complete RF systems and we built many of these within days to address very short lead times. The volume of product we have manufactured and shipped has been astronomical. We’re applying similar advance preparation strategies as more NextGen TV opportunities surface. That will ensure we can properly address growing interest in our Powerlite low-power antenna systems for ATSC 3.0 SFNs, while also serving our other customers without delay.”
Martin anticipates a busy period ahead for replacement TV antennas worldwide, including more than 200 high-power antennas and transmission line runs in North America that have been in operation for at least 30 years. Dielectric’s existing RF portfolio, augmented by the ongoing development of antennas, filters and components, will ensure that these customers have access to the latest RF technology and manufacturing capacity to meet their technical and delivery needs. Dielectric’s recently-introduced RFHAWKEYE for real-time monitoring of antenna feed systems will serve another critical business need moving forward, providing customers with previously unavailable status monitoring of these essential systems.
Keith Pelletier, Vice President and General Manager, Dielectric, adds that Dielectric’s focus on the launch of LPTV design tools will allow for quicker fulfillment of international TV orders, which largely operate lower power systems, in addition to serving NextGen TV and other domestic LPTV customers.
“We have added support for nearly 20 additional antenna patterns that apply to NextGen TV SFN systems and low-power TV systems worldwide, along with a comprehensive software toolset for consultants to enhance SFN coverage analysis and antenna configurations,” said Pelletier. “These advanced toolsets, along with maintaining our high-capacity manufacturing practices established during repack, ensures that Dielectric customers will be well-served for years to come.”
Dielectric will present information on its expanded Powerlite Series, RFHAWKEYE, and its overall NextGen TV value proposition this week during NAB Show Express. Dielectric’s virtual NAB Show Express presence is accessible at https://bit.ly/3cfRHKf this Wednesday and Thursday, May 13-14.
In addition to new product information, brochures and video presentations, Dielectric has posted “ATSC 3.0 SFN Network Planning and Antenna Design,” a white paper intended for presentation at the 2020 NAB Show by Dielectric VP of Engineering John Schadler.
Based in Raymond, Maine, Dielectric LLC is a wholly owned subsidiary of Sinclair Broadcast Group. Dielectric is a leading provider of innovative broadcast products. Now celebrating its 77th year of operation, the company builds and delivers antennas and RF systems optimized for every TV and FM radio broadcast need since 1942. Dielectric is an innovative, customer-centric organization with a long history of engineering excellence in designing and manufacturing high-quality broadcast solutions. As a trust partner of broadcasters worldwide, Dielectric maintains its legacy of advanced, precision RF solutions while building in features that prepare broadcasters for the future. More information can be accessed at www.dielectric.com
# # #